What size should I make my tile grout joints?

A question I’ve been asked a lot lately is what size should I make tile grout joints? It’s come up so much that I’m writing an article about it!

Grout joints can vary from 1-2mm to up to 10mm and is the gap between tiles. The general rule of thumb is: the smaller the grout joints, the better! But it isn’t always possible to use a 1-2mm grout joint. Keep on reading as I share everything you need to know about tile grout joints.

Related article: Everything you need to know about picking the right grout
Related article: 15 stunning bathrooms that don’t use white tiles

What size should I make my tile grout joints?

Ideally, your grout joints would be 1-3mm. Often we see 1mm grout joints between wall tiles and 3mm grout joints between floor tiles.

Not only does it look better to have smaller joints, it also can minimise issues. For example, grout will discolour over time so keeping the joints smaller will minimse this issue.

The grout joint is also the weakest part of the tiled surface so larger joints means increased chance of cracking and the more obvious cracked grout will appear.

New bathtub

When would you use a larger tile joint?

In areas where there is more movement, such as in outdoor areas, you would need a larger grout joint of around 3-5mm.

It also depends on the tile you’re using. Rectified tiles with a square edge can have tight tile joints but if your tile has a cushion edge, you would most likely need a 3-5mm grout joint.

Quarry tiles can also need larger grout joints — up to a 10mm joint — because they are subject to thermal movement and will expand and contract in different climate.

Sometimes, you may also need a larger grout joint to get the right fall (i.e. floor slope to a floor waste for water to drain away) in smaller bathrooms.

How to pick the right grout

What else should I know about grout?

Ideally you should use a high quality grout, as they have more polymer which makes them stronger, more flexible, and more resistant to water absorption, which is the main cause of grout discolouration.

Not everyone knows that there are dozens of grout colours to choose from. These range from white and ivory, to light and mid-grey, black and brown, and even bright colours too. When you select your tiles, I suggest asking to see a grout colour chart so you can select a grout colour to complement your tile.

Watch this quick video where I explain everything you need to know to select the right grout.

If you have more questions about tile grout joints, publish it in the comments section below and we’ll answer it asap!

More building and reno tips

This article was first published in October 2017 and continues to be updated with latest information and images.

Gina Beschorner Style Curator

Welcome to Style Curator, your destination for daily interiors inspiration, styling tips, reno advice, home tours and DIY projects!

We're on a mission to help you create a home you love. And with plenty of tips and tricks, tutorials and other home inspo, we give you all the tools to achieve it!

I’m Gina, Founder and Interior Designer, and you can read more about Style Curator here.

Subscribe

Get the best of the blog to your inbox each week PLUS instant access to our free downloads!

    We respect your privacy. Unsubscribe at any time.
    Interior style quiz

    Shop our fave online stores

    As seen in

    Style Curator in the media

    3 COMMENTS

    1. Hi! This article is great!
      We are renovating a home, and I found a geometric black/white cement tile that I LOVE, and was hoping to use as a backsplash in our kitchen (behind the stove) but is way out of our budget. Instead, I’m opting for a plain white rhombus-shaped tile using black grout to create a geometric pattern with the contrast. I was considering doing a thicker grout joint to make the pattern really pop. What’s the thickest you’d recommend?
      Thanks!

      • Hi Christy, thank you, I’m glad you found it helpful 🙂 For this kind of splashback I would usually do a 1.5mm or 2mm joint but if want extra impact you could use a 3mm joint. I wouldn’t go any larger than that. Also, if I were you I would use a dark grey grout like ‘slate grey’ as it will create the look you want without being too harsh. Hope that helps!

    LEAVE A REPLY

    Please enter your comment!
    Please enter your name here